The correct installation steps for water softening equipment.

1, water softening equipment at the time of delivery, first let the owner to confirm whether the machine is intact. Standard product water softeners delivered with plastic buckles on the outer packaging straps are fixed.

2, after opening the package, the installer will explain some of the product's functional characteristics for the owner, so that the owner knows how the water is treated, and use it with confidence.

3, connected to the water purifier inlet pipe. Because the household's water purifier and water softener is installed in one piece, so the water pipe is divided into two ways, respectively, connected to the water purification, water softening machine.

4, the water softener will be connected to the inlet and outlet of the pipe clean. Because the water pipe is installed first, placed outside will inevitably be some dust, if not the regular installation team, this point is usually ignored. There is also to let the installer in the interface of the mouth of the pipes to be wound with white tape a few turns, pay attention to leak prevention and du

5, in the water purifier next to the temporary connection of a water pipe, used to put out the water purifier when the internal exclusion of sewage required. Because it is a new machine, there are still some residual impurities inside easy to be ignored.

6, the general water softener in the computer board can be set to flush every 12 hours can be, each time the time is about 30 seconds, but start debugging flushing, because it is a new machine, so you need to flush about half an hour.

7, after the installation of the water softener will be poured into the salt. The salt used in the water softener is imported special salt, the damage to the machine and the impact of water quality will be relatively small, the shape is a bit like a cockroach pill.

8, and then in the commissioning of the water softener, to turn the computer screen on the machine first to a direction. Because of the fear that in transport will be broken, so it is sent to the reverse, connecting the computer screen and the body of the place is active, will not affect the normal use of the machine.